Network Working Group G. Zorn
Request for Comments: 2619 B. Aboba
Category: Standards Track Microsoft
June 1999
Network Working Group G. Zorn
Request for Comments: 2619 B. Aboba
Category: Standards Track Microsoft
June 1999
RADIUS Authentication Server MIB
RADIUS身份验证服务器MIB
Status of this Memo
本备忘录的状况
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
本文件规定了互联网社区的互联网标准跟踪协议，并要求进行讨论和提出改进建议。有关本协议的标准化状态和状态，请参考当前版本的“互联网官方协议标准”（STD 1）。本备忘录的分发不受限制。
Copyright Notice
版权公告
Copyright (C) The Internet Society (1999). All Rights Reserved.
版权所有（C）互联网协会（1999年）。版权所有。
Abstract
摘要
This memo defines a set of extensions which instrument RADIUS authentication server functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions IP-based management stations can manage RADIUS authentication servers.
此备忘录定义了一组扩展，instrument RADIUS身份验证服务器可以使用这些扩展。这些扩展代表管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。使用这些扩展，基于IP的管理站可以管理RADIUS身份验证服务器。
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing RADIUS authentication servers.
此备忘录定义了管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。特别是，它描述了用于管理RADIUS身份验证服务器的托管对象。
RADIUS authentication servers are today widely deployed by dialup Internet Service Providers, in order to provide authentication services. As a result, the effective management of RADIUS authentication servers is of considerable importance.
RADIUS身份验证服务器如今被拨号互联网服务提供商广泛部署，以提供身份验证服务。因此，RADIUS认证服务器的有效管理非常重要。
The SNMP Management Framework presently consists of five major components:
SNMP管理框架目前由五个主要组件组成：
o An overall architecture, described in RFC 2571 [1].
o RFC 2571[1]中描述的总体架构。
o Mechanisms for describing and naming objects and events for the purpose of management. The first version of this Structure of Management Information (SMI) is called SMIv1 and described in STD 16, RFC 1155 [2], STD 16, RFC 1212 [3] and RFC 1215 [4]. The second version, called SMIv2, is described in STD 58, RFC 2578 [5], RFC 2579 [6] and RFC 2580 [7].
o 为管理目的描述和命名对象和事件的机制。这种管理信息结构（SMI）的第一个版本称为SMIv1，并在STD 16、RFC 1155[2]、STD 16、RFC 1212[3]和RFC 1215[4]中进行了描述。第二个版本称为SMIv2，在STD 58、RFC 2578[5]、RFC 2579[6]和RFC 2580[7]中进行了描述。
o Message protocols for transferring management information. The first version of the SNMP message protocol is called SNMPv1 and described in STD 15, RFC 1157 [8]. A second version of the SNMP message protocol, which is not an Internet standards track protocol, is called SNMPv2c and described in RFC 1901 [9] and RFC 1906 [10]. The third version of the message protocol is called SNMPv3 and described in RFC 1906 [10], RFC 2572 [11] and RFC 2574 [12].
o 用于传输管理信息的消息协议。SNMP消息协议的第一个版本称为SNMPv1，在STD 15、RFC 1157[8]中进行了描述。SNMP消息协议的第二个版本不是互联网标准跟踪协议，称为SNMPv2c，在RFC 1901[9]和RFC 1906[10]中进行了描述。消息协议的第三个版本称为SNMPv3，在RFC 1906[10]、RFC 2572[11]和RFC 2574[12]中进行了描述。
o Protocol operations for accessing management information. The first set of protocol operations and associated PDU formats is described in STD 15, RFC 1157 [8]. A second set of protocol operations and associated PDU formats is described in RFC 1905 [13].
o 访问管理信息的协议操作。STD 15、RFC 1157[8]中描述了第一组协议操作和相关PDU格式。RFC 1905[13]中描述了第二组协议操作和相关PDU格式。
o A set of fundamental applications described in RFC 2573 [14] and the view-based access control mechanism described in RFC 2575 [15].
o RFC 2573[14]中描述的一组基本应用程序和RFC 2575[15]中描述的基于视图的访问控制机制。
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI.
托管对象通过虚拟信息存储（称为管理信息库或MIB）进行访问。MIB中的对象是使用SMI中定义的机制定义的。
This memo specifies a MIB module that is compliant to the SMIv2. A MIB conforming to the SMIv1 can be produced through the appropriate translations. The resulting translated MIB must be semantically equivalent, except where objects or events are omitted because no translation is possible (use of Counter64). Some machine readable information in SMIv2 will be converted into textual descriptions in SMIv1 during the translation process. However, this loss of machine readable information is not considered to change the semantics of the MIB.
此备忘录指定了符合SMIv2的MIB模块。通过适当的翻译，可以生成符合SMIv1的MIB。生成的已翻译MIB必须在语义上等效，除非由于无法翻译而省略了对象或事件（使用计数器64）。在翻译过程中，SMIv2中的一些机器可读信息将转换为SMIv1中的文本描述。但是，这种机器可读信息的丢失不被认为会改变MIB的语义。
The RADIUS authentication protocol, described in [16], distinguishes between the client function and the server function. In RADIUS authentication, clients send Access-Requests, and servers reply with Access-Accepts, Access-Rejects, and Access-Challenges. Typically NAS devices implement the client function, and thus would be expected to implement the RADIUS authentication client MIB, while RADIUS authentication servers implement the server function, and thus would be expected to implement the RADIUS authentication server MIB.
[16]中描述的RADIUS认证协议区分了客户端功能和服务器功能。在RADIUS身份验证中，客户端发送访问请求，服务器回复访问接受、访问拒绝和访问挑战。通常，NAS设备实现客户端功能，因此预期将实现RADIUS身份验证客户端MIB，而RADIUS身份验证服务器实现服务器功能，因此预期将实现RADIUS身份验证服务器MIB。
However, it is possible for a RADIUS authentication entity to perform both client and server functions. For example, a RADIUS proxy may act as a server to one or more RADIUS authentication clients, while simultaneously acting as an authentication client to one or more authentication servers. In such situations, it is expected that RADIUS entities combining client and server functionality will support both the client and server MIBs.
但是，RADIUS身份验证实体可以同时执行客户端和服务器功能。例如，RADIUS代理可以充当一个或多个RADIUS身份验证客户端的服务器，同时充当一个或多个身份验证服务器的身份验证客户端。在这种情况下，结合客户端和服务器功能的RADIUS实体预计将同时支持客户端和服务器MIB。
This MIB module contains fourteen scalars as well as a single table:
此MIB模块包含十四个标量和一个表：
(1) the RADIUS Authentication Client Table contains one row for each RADIUS authentication client that the server shares a secret with.
(1) RADIUS身份验证客户端表包含服务器共享机密的每个RADIUS身份验证客户端的一行。
Each entry in the RADIUS Authentication Client Table includes twelve columns presenting a view of the activity of the RADIUS authentication server.
RADIUS身份验证客户端表中的每个条目包括十二列，显示RADIUS身份验证服务器活动的视图。
RADIUS-AUTH-SERVER-MIB DEFINITIONS ::= BEGIN
RADIUS-AUTH-SERVER-MIB DEFINITIONS ::= BEGIN
IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
从SNMPv2导入模块标识、对象类型、对象标识、计数器32、整数32、IP地址、时间标记、mib-2，从SNMPv2 CONF导入SNMP-FRAMEWORK-mib MODULE-COMPLIANCE导入SMI-SNMPadmin，从SNMPv2 CONF导入对象组；
radiusAuthServMIB MODULE-IDENTITY LAST-UPDATED "9906110000Z" ORGANIZATION "IETF RADIUS Working Group." CONTACT-INFO " Bernard Aboba Microsoft
radiusAuthServMIB模块标识最后更新的“9906100000Z”组织“IETF RADIUS工作组”。联系方式“Bernard Aboba Microsoft
One Microsoft Way Redmond, WA 98052 US
美国华盛顿州雷德蒙市微软大道一号，邮编：98052
Phone: +1 425 936 6605
EMail: bernarda@microsoft.com"
DESCRIPTION
"The MIB module for entities implementing the server
side of the Remote Access Dialin User Service (RADIUS)
authentication protocol."
REVISION "9906110000Z" -- 11 Jun 1999
DESCRIPTION "Initial version as published in RFC 2619"
::= { radiusAuthentication 1 }
Phone: +1 425 936 6605
EMail: bernarda@microsoft.com"
DESCRIPTION
"The MIB module for entities implementing the server
side of the Remote Access Dialin User Service (RADIUS)
authentication protocol."
REVISION "9906110000Z" -- 11 Jun 1999
DESCRIPTION "Initial version as published in RFC 2619"
::= { radiusAuthentication 1 }
radiusMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The OID assigned to RADIUS MIB work by the IANA."
::= { mib-2 67 }
radiusMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The OID assigned to RADIUS MIB work by the IANA."
::= { mib-2 67 }
radiusAuthentication OBJECT IDENTIFIER ::= {radiusMIB 1}
radiusAuthentication OBJECT IDENTIFIER ::= {radiusMIB 1}
radiusAuthServMIBObjects OBJECT IDENTIFIER ::=
{ radiusAuthServMIB 1 }
radiusAuthServMIBObjects OBJECT IDENTIFIER ::=
{ radiusAuthServMIB 1 }
radiusAuthServ OBJECT IDENTIFIER ::= { radiusAuthServMIBObjects 1 }
radiusAuthServ OBJECT IDENTIFIER ::= { radiusAuthServMIBObjects 1 }
radiusAuthServIdent OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the
RADIUS authentication server software in use on the
system, for example; `FNS-2.1'"
::= {radiusAuthServ 1}
radiusAuthServIdent OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the
RADIUS authentication server software in use on the
system, for example; `FNS-2.1'"
::= {radiusAuthServ 1}
radiusAuthServUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a process),
this value will be the time elapsed (in hundredths of a
seco) since the server process was started.
For software without persistent state, this value will
be zero."
::= {radiusAuthServ 2}
radiusAuthServUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a process),
this value will be the time elapsed (in hundredths of a
seco) since the server process was started.
For software without persistent state, this value will
be zero."
::= {radiusAuthServ 2}
radiusAuthServResetTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a process)
and supports a `reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed (in hundredths of a second) since the
server was `reset.' For software that does not
have persistence or does not support a `reset' operation,
this value will be zero."
::= {radiusAuthServ 3}
radiusAuthServResetTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a process)
and supports a `reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed (in hundredths of a second) since the
server was `reset.' For software that does not
have persistence or does not support a `reset' operation,
this value will be zero."
::= {radiusAuthServ 3}
radiusAuthServConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
reset(2),
initializing(3),
running(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
server state. When set to reset(2), any persistent
server state (such as a process) is reinitialized as if
the server had just been started. This value will
never be returned by a read operation. When read, one of
the following values will be returned:
other(1) - server in some unknown state;
initializing(3) - server (re)initializing;
running(4) - server currently running."
::= {radiusAuthServ 4}
radiusAuthServConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
reset(2),
initializing(3),
running(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
server state. When set to reset(2), any persistent
server state (such as a process) is reinitialized as if
the server had just been started. This value will
never be returned by a read operation. When read, one of
the following values will be returned:
other(1) - server in some unknown state;
initializing(3) - server (re)initializing;
running(4) - server currently running."
::= {radiusAuthServ 4}
-- New Stats proposed by Dale E. Reed Jr (daler@iea-software.com)
--Dale E.Reed Jr提出的新统计数据(daler@iea-（www.software.com）
radiusAuthServTotalAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on the
authentication port."
::= { radiusAuthServ 5}
radiusAuthServTotalAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on the
authentication port."
::= { radiusAuthServ 5}
radiusAuthServTotalInvalidRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current
radiusAuthServTotalInvalidRequests对象类型语法计数器32 MAX-ACCESS只读状态当前
DESCRIPTION
"The number of RADIUS Access-Request packets
received from unknown addresses."
::= { radiusAuthServ 6 }
DESCRIPTION
"The number of RADIUS Access-Request packets
received from unknown addresses."
::= { radiusAuthServ 6 }
radiusAuthServTotalDupAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate RADIUS Access-Request
packets received."
::= { radiusAuthServ 7 }
radiusAuthServTotalDupAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate RADIUS Access-Request
packets received."
::= { radiusAuthServ 7 }
radiusAuthServTotalAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets sent."
::= { radiusAuthServ 8 }
radiusAuthServTotalAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets sent."
::= { radiusAuthServ 8 }
radiusAuthServTotalAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets sent."
::= { radiusAuthServ 9 }
radiusAuthServTotalAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets sent."
::= { radiusAuthServ 9 }
radiusAuthServTotalAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets sent."
::= { radiusAuthServ 10 }
radiusAuthServTotalAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets sent."
::= { radiusAuthServ 10 }
radiusAuthServTotalMalformedAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Request
packets received. Bad authenticators
and unknown types are not included as
malformed Access-Requests."
::= { radiusAuthServ 11 }
radiusAuthServTotalMalformedAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Request
packets received. Bad authenticators
and unknown types are not included as
malformed Access-Requests."
::= { radiusAuthServ 11 }
radiusAuthServTotalBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Authentication-Request packets
which contained invalid Signature attributes received."
::= { radiusAuthServ 12 }
radiusAuthServTotalBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Authentication-Request packets
which contained invalid Signature attributes received."
::= { radiusAuthServ 12 }
radiusAuthServTotalPacketsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets
silently discarded for some reason other
than malformed, bad authenticators or
unknown types."
::= { radiusAuthServ 13 }
radiusAuthServTotalPacketsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets
silently discarded for some reason other
than malformed, bad authenticators or
unknown types."
::= { radiusAuthServ 13 }
radiusAuthServTotalUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type which
were received."
::= { radiusAuthServ 14 }
radiusAuthServTotalUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type which
were received."
::= { radiusAuthServ 14 }
-- End of new
--新政结束
radiusAuthClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAuthClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS authentication
clients with which the server shares a secret."
::= { radiusAuthServ 15 }
radiusAuthClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAuthClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS authentication
clients with which the server shares a secret."
::= { radiusAuthServ 15 }
radiusAuthClientEntry OBJECT-TYPE SYNTAX RadiusAuthClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS authentication client with which the server shares a secret."
radiusAuthClientEntry对象类型语法radiusAuthClientEntry MAX-ACCESS不可访问状态当前描述“表示服务器与之共享机密的RADIUS身份验证客户端的条目（概念行）。”
INDEX { radiusAuthClientIndex }
::= { radiusAuthClientTable 1 }
INDEX { radiusAuthClientIndex }
::= { radiusAuthClientTable 1 }
RadiusAuthClientEntry ::= SEQUENCE {
radiusAuthClientIndex Integer32,
radiusAuthClientAddress IpAddress,
radiusAuthClientID SnmpAdminString,
radiusAuthServAccessRequests Counter32,
radiusAuthServDupAccessRequests Counter32,
radiusAuthServAccessAccepts Counter32,
radiusAuthServAccessRejects Counter32,
radiusAuthServAccessChallenges Counter32,
radiusAuthServMalformedAccessRequests Counter32,
radiusAuthServBadAuthenticators Counter32,
radiusAuthServPacketsDropped Counter32,
radiusAuthServUnknownTypes Counter32
}
RadiusAuthClientEntry ::= SEQUENCE {
radiusAuthClientIndex Integer32,
radiusAuthClientAddress IpAddress,
radiusAuthClientID SnmpAdminString,
radiusAuthServAccessRequests Counter32,
radiusAuthServDupAccessRequests Counter32,
radiusAuthServAccessAccepts Counter32,
radiusAuthServAccessRejects Counter32,
radiusAuthServAccessChallenges Counter32,
radiusAuthServMalformedAccessRequests Counter32,
radiusAuthServBadAuthenticators Counter32,
radiusAuthServPacketsDropped Counter32,
radiusAuthServUnknownTypes Counter32
}
radiusAuthClientIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each RADIUS
authentication client with which this server
communicates."
::= { radiusAuthClientEntry 1 }
radiusAuthClientIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each RADIUS
authentication client with which this server
communicates."
::= { radiusAuthClientEntry 1 }
radiusAuthClientAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-IP-Address of the RADIUS authentication client
referred to in this table entry."
::= { radiusAuthClientEntry 2 }
radiusAuthClientAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-IP-Address of the RADIUS authentication client
referred to in this table entry."
::= { radiusAuthClientEntry 2 }
radiusAuthClientID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-Identifier of the RADIUS authentication client
referred to in this table entry. This is not necessarily
the same as sysName in MIB II."
::= { radiusAuthClientEntry 3 }
radiusAuthClientID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-Identifier of the RADIUS authentication client
referred to in this table entry. This is not necessarily
the same as sysName in MIB II."
::= { radiusAuthClientEntry 3 }
-- Server Counters
--服务器计数器
--
-- Responses = AccessAccepts + AccessRejects + AccessChallenges
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - Responses = Pending
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped = entries logged
--
-- Responses = AccessAccepts + AccessRejects + AccessChallenges
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - Responses = Pending
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped = entries logged
radiusAuthServAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on the authentication
port from this client."
::= { radiusAuthClientEntry 4 }
radiusAuthServAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on the authentication
port from this client."
::= { radiusAuthClientEntry 4 }
radiusAuthServDupAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate RADIUS Access-Request
packets received from this client."
::= { radiusAuthClientEntry 5 }
radiusAuthServDupAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate RADIUS Access-Request
packets received from this client."
::= { radiusAuthClientEntry 5 }
radiusAuthServAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets
sent to this client."
::= { radiusAuthClientEntry 6 }
radiusAuthServAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets
sent to this client."
::= { radiusAuthClientEntry 6 }
radiusAuthServAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets
sent to this client."
::= { radiusAuthClientEntry 7 }
radiusAuthServAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets
sent to this client."
::= { radiusAuthClientEntry 7 }
radiusAuthServAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only
radiusAuthServAccessChallenges对象类型语法计数器32 MAX-ACCESS只读
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets
sent to this client."
::= { radiusAuthClientEntry 8 }
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets
sent to this client."
::= { radiusAuthClientEntry 8 }
radiusAuthServMalformedAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Request
packets received from this client.
Bad authenticators and unknown types are not included as
malformed Access-Requests."
::= { radiusAuthClientEntry 9 }
radiusAuthServMalformedAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Request
packets received from this client.
Bad authenticators and unknown types are not included as
malformed Access-Requests."
::= { radiusAuthClientEntry 9 }
radiusAuthServBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Authentication-Request packets
which contained invalid Signature attributes received
from this client."
::= { radiusAuthClientEntry 10 }
radiusAuthServBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Authentication-Request packets
which contained invalid Signature attributes received
from this client."
::= { radiusAuthClientEntry 10 }
radiusAuthServPacketsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets from this
client silently discarded for some reason other
than malformed, bad authenticators or
unknown types."
::= { radiusAuthClientEntry 11 }
radiusAuthServPacketsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets from this
client silently discarded for some reason other
than malformed, bad authenticators or
unknown types."
::= { radiusAuthClientEntry 11 }
radiusAuthServUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type which
were received from this client."
::= { radiusAuthClientEntry 12 }
radiusAuthServUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type which
were received from this client."
::= { radiusAuthClientEntry 12 }
-- conformance information
--一致性信息
radiusAuthServMIBConformance
OBJECT IDENTIFIER ::= { radiusAuthServMIB 2 }
radiusAuthServMIBCompliances
OBJECT IDENTIFIER ::= { radiusAuthServMIBConformance 1 }
radiusAuthServMIBGroups
OBJECT IDENTIFIER ::= { radiusAuthServMIBConformance 2 }
radiusAuthServMIBConformance
OBJECT IDENTIFIER ::= { radiusAuthServMIB 2 }
radiusAuthServMIBCompliances
OBJECT IDENTIFIER ::= { radiusAuthServMIBConformance 1 }
radiusAuthServMIBGroups
OBJECT IDENTIFIER ::= { radiusAuthServMIBConformance 2 }
-- compliance statements
--合规声明
radiusAuthServMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for authentication servers implementing the RADIUS Authentication Server MIB." MODULE -- this module MANDATORY-GROUPS { radiusAuthServMIBGroup }
radiusAuthServMIBCompliance MODULE-COMPLIANCE STATUS当前描述“用于实现RADIUS身份验证服务器MIB的身份验证服务器的符合性声明。”模块--此模块为必填模块-GROUPS{radiusAuthServMIBGroup}
OBJECT radiusAuthServConfigReset WRITE-SYNTAX INTEGER { reset(2) } DESCRIPTION "The only SETable value is 'reset' (2)."
OBJECT radiusAuthServConfigReset写入语法整数{reset（2）}说明“唯一可设置的值是'reset'（2）。”
::= { radiusAuthServMIBCompliances 1 }
::= { radiusAuthServMIBCompliances 1 }
-- units of conformance
--一致性单位
radiusAuthServMIBGroup OBJECT-GROUP OBJECTS {radiusAuthServIdent, radiusAuthServUpTime, radiusAuthServResetTime, radiusAuthServConfigReset, radiusAuthServTotalAccessRequests, radiusAuthServTotalInvalidRequests, radiusAuthServTotalDupAccessRequests, radiusAuthServTotalAccessAccepts, radiusAuthServTotalAccessRejects, radiusAuthServTotalAccessChallenges, radiusAuthServTotalMalformedAccessRequests, radiusAuthServTotalBadAuthenticators, radiusAuthServTotalPacketsDropped, radiusAuthServTotalUnknownTypes, radiusAuthClientAddress, radiusAuthClientID, radiusAuthServAccessRequests, radiusAuthServDupAccessRequests, radiusAuthServAccessAccepts,
radiusAuthServMIBGroup对象组对象{RadiusAuthServeNT、radiusAuthServUpTime、radiusAuthServResetTime、radiusAuthServConfigReset、radiusAuthServTotalAccessRequests、radiusAuthServTotalInvalidRequests、radiusAuthServTotalDupAccessRequests、RadiusAuthServTotalAccessReceipts、radiusAuthServTotalAccessRejects、RadiusAuthServTotalAccessChallects、RadiusAuthServTotalMalformedAccessRequeuests、radiusAuthServTotalBadAuthenticators、radiusAuthServTotalPacketsDropped、radiusAuthServTotalUnknownTypes、radiusAuthClientAddress、RadiusAuthServEntId、radiusAuthServAccessRequests、radiusAuthServDupAccessRequests、RadiusAuthServAccessAccessAccessAccepts、，
radiusAuthServAccessRejects,
radiusAuthServAccessChallenges,
radiusAuthServMalformedAccessRequests,
radiusAuthServBadAuthenticators,
radiusAuthServPacketsDropped,
radiusAuthServUnknownTypes
}
STATUS current
DESCRIPTION
"The collection of objects providing management of
a RADIUS Authentication Server."
::= { radiusAuthServMIBGroups 1 }
radiusAuthServAccessRejects,
radiusAuthServAccessChallenges,
radiusAuthServMalformedAccessRequests,
radiusAuthServBadAuthenticators,
radiusAuthServPacketsDropped,
radiusAuthServUnknownTypes
}
STATUS current
DESCRIPTION
"The collection of objects providing management of
a RADIUS Authentication Server."
::= { radiusAuthServMIBGroups 1 }
END
终止
[1] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2571, April 1999.
[1] Harrington，D.，Presuhn，R.，和B.Wijnen，“描述SNMP管理框架的体系结构”，RFC 2571，1999年4月。
[2] Rose, M., and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based Internets", STD 16, RFC 1155, May 1990.
[2] Rose，M.和K.McCloghrie，“基于TCP/IP的互联网管理信息的结构和识别”，STD 16，RFC 1155，1990年5月。
[3] Rose, M., and K. McCloghrie, "Concise MIB Definitions", STD 16, RFC 1212, March 1991.
[3] Rose，M.和K.McCloghrie，“简明MIB定义”，STD 16，RFC 1212，1991年3月。
[4] Rose, M., "A Convention for Defining Traps for use with the SNMP", RFC 1215, March 1991.
[4] Rose，M.“定义用于SNMP的陷阱的约定”，RFC1215，1991年3月。
[5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[5] McCloghrie，K.，Perkins，D.，Schoenwaeld，J.，Case，J.，Rose，M.和S.Waldbusser，“管理信息的结构版本2（SMIv2）”，STD 58，RFC 2578，1999年4月。
[6] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[6] McCloghrie，K.，Perkins，D.，Schoenwaeld，J.，Case，J.，Rose，M.和S.Waldbusser，“SMIv2的文本约定”，STD 58，RFC 2579，1999年4月。
[7] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[7] McCloghrie，K.，Perkins，D.，Schoenwaeld，J.，Case，J.，Rose，M.和S.Waldbusser，“SMIv2的一致性声明”，STD 58，RFC 25801999年4月。
[8] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol", STD 15, RFC 1157, May 1990.
[8] Case，J.，Fedor，M.，Schoffstall，M.，和J.Davin，“简单网络管理协议”，STD 15，RFC 1157，1990年5月。
[9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, January 1996.
[9] Case，J.，McCloghrie，K.，Rose，M.，和S.Waldbusser，“基于社区的SNMPv2简介”，RFC 19011996年1月。
[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996.
[10] Case，J.，McCloghrie，K.，Rose，M.，和S.Waldbusser，“简单网络管理协议（SNMPv2）版本2的传输映射”，RFC 1906，1996年1月。
[11] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2572, April 1999.
[11] Case，J.，Harrington D.，Presohn R.，和B.Wijnen，“简单网络管理协议（SNMP）的消息处理和调度”，RFC 2572，1999年4月。
[12] Blumenthal, U., and B. Wijnen, "User-based Security Model for Version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2574, April 1999.
[12] Blumenthal，U.和B.Wijnen，“简单网络管理协议（SNMPv3）第3版基于用户的安全模型”，RFC 2574，1999年4月。
[13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996.
[13] Case，J.，McCloghrie，K.，Rose，M.，和S.Waldbusser，“简单网络管理协议（SNMPv2）版本2的协议操作”，RFC 1905，1996年1月。
[14] Levi, D., Meyer, P., and B. Stewart, "SNMP Applications", RFC 2573, April 1999.
[14] Levi，D.，Meyer，P.，和B.Stewart，“SNMP应用”，RFC2573，1999年4月。
[15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access Control Model for the Simple Network Management Protocol (SNMP)", RFC 2575, April 1999.
[15] Wijnen，B.，Presuhn，R.，和K.McCloghrie，“简单网络管理协议（SNMP）基于视图的访问控制模型”，RFC2575，1999年4月。
[16] Rigney, C., Rubens, A., Simpson W. and S. Willens, "Remote Authentication Dial In User Service (RADIUS)", RFC 2138, April 1997.
[16] Rigney，C.，Rubens，A.，Simpson W.和S.Willens，“远程认证拨入用户服务（RADIUS）”，RFC 21381997年4月。
There are a number of management objects defined in this MIB that have a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations.
此MIB中定义了许多管理对象，它们的MAX-ACCESS子句为read-write和/或read-create。在某些网络环境中，此类对象可能被视为敏感或易受攻击。在没有适当保护的非安全环境中支持SET操作可能会对网络操作产生负面影响。
There are a number of managed objects in this MIB that may contain sensitive information. These are:
此MIB中有许多托管对象可能包含敏感信息。这些是：
radiusAuthClientAddress This can be used to determine the address of the RADIUS authentication client with which the server is communicating. This information could be useful in impersonating the client.
radiusAuthClientAddress可用于确定服务器与之通信的RADIUS身份验证客户端的地址。此信息在模拟客户端时可能很有用。
radiusAuthClientID This can be used to determine the client ID of the authentication client with which the server is communicating. This information could be useful in
radiusAuthClientID可用于确定服务器与之通信的身份验证客户端的客户端ID。这一信息可能有助于我们的工作
impersonating the client.
模拟客户机。
It is thus important to control even GET access to these objects and possibly to even encrypt the values of these object when sending them over the network via SNMP. Not all versions of SNMP provide features for such a secure environment.
因此，在通过SNMP通过网络发送这些对象时，控制甚至访问这些对象，甚至可能加密这些对象的值，这一点非常重要。并非所有版本的SNMP都为这种安全环境提供功能。
SNMPv1 by itself is not a secure environment. Even if the network itself is secure (for example by using IPSec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB.
SNMPv1本身不是一个安全的环境。即使网络本身是安全的（例如通过使用IPSec），也无法控制安全网络上的谁可以访问和获取/设置（读取/更改/创建/删除）此MIB中的对象。
It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User-based Security Model RFC 2574 [12] and the View-based Access Control Model RFC 2575 [15] is recommended. Using these security features, customer/users can give access to the objects only to those principals (users) that have legitimate rights to GET or SET (change/create/delete) them.
建议实施者考虑SNMPv3框架提供的安全特性。具体而言，建议使用基于用户的安全模型RFC 2574[12]和基于视图的访问控制模型RFC 2575[15]。使用这些安全功能，客户/用户只能将对象的访问权限授予那些具有获取或设置（更改/创建/删除）对象的合法权限的主体（用户）。
The authors acknowledge the contributions of the RADIUS Working Group in the development of this MIB. Thanks to Narendra Gidwani of Microsoft, Allan C. Rubens of MERIT, Carl Rigney of Livingston and Peter Heitman of American Internet Corporation for useful discussions of this problem space.
作者感谢RADIUS工作组在MIB开发中的贡献。感谢微软公司的纳伦德拉·吉德瓦尼（Narendra Gidwani）、梅里特公司的艾伦·鲁本斯（Allan C.Rubens）、利文斯顿公司的卡尔·里格尼（Carl Rigney）和美国互联网公司的彼得·海特曼（Peter Heitman）对这个问题空间进行了有益的讨论。
Bernard Aboba Microsoft Corporation One Microsoft Way Redmond, WA 98052
伯纳德·阿博巴（Bernard Aboba）微软公司华盛顿州雷德蒙微软大道一号，邮编：98052
Phone: 425-936-6605 EMail: bernarda@microsoft.com
电话：425-936-6605电子邮件：bernarda@microsoft.com
Glen Zorn Microsoft Corporation One Microsoft Way Redmond, WA 98052
格伦·佐恩微软公司华盛顿州雷德蒙微软大道一号，邮编：98052
Phone: 425-703-1559 EMail: glennz@microsoft.com
电话：425-703-1559电子邮件：glennz@microsoft.com
The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards- related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementors or users of this specification can be obtained from the IETF Secretariat.
IETF对可能声称与本文件所述技术的实施或使用有关的任何知识产权或其他权利的有效性或范围，或此类权利下的任何许可可能或可能不可用的程度，不采取任何立场；它也不表示它已作出任何努力来确定任何此类权利。有关IETF在标准跟踪和标准相关文件中权利的程序信息，请参见BCP-11。可从IETF秘书处获得可供发布的权利声明副本和任何许可证保证，或本规范实施者或用户试图获得使用此类专有权利的一般许可证或许可的结果。
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director.
IETF邀请任何相关方提请其注意任何版权、专利或专利申请，或其他可能涉及实施本标准所需技术的专有权利。请将信息发送给IETF执行董事。
Copyright (C) The Internet Society (1999). All Rights Reserved.
版权所有（C）互联网协会（1999年）。版权所有。
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implmentation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.
本文件及其译本可复制并提供给他人，对其进行评论或解释或协助其实施的衍生作品可全部或部分编制、复制、出版和分发，不受任何限制，前提是上述版权声明和本段包含在所有此类副本和衍生作品中。但是，不得以任何方式修改本文件本身，例如删除版权通知或对互联网协会或其他互联网组织的引用，除非出于制定互联网标准的需要，在这种情况下，必须遵循互联网标准过程中定义的版权程序，或根据需要将其翻译成英语以外的其他语言。
The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.
上述授予的有限许可是永久性的，互联网协会或其继承人或受让人不会撤销。
This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
本文件和其中包含的信息是按“原样”提供的，互联网协会和互联网工程任务组否认所有明示或暗示的保证，包括但不限于任何保证，即使用本文中的信息不会侵犯任何权利，或对适销性或特定用途适用性的任何默示保证。
Acknowledgement
确认
Funding for the RFC Editor function is currently provided by the Internet Society.
RFC编辑功能的资金目前由互联网协会提供。